Home > DC Motor >

Sensorless 24V BLDC Motor Driver , Bldc Driver Board For Centrifugal Blower

Categories 24V BLDC Motor Driver
Brand Name: JUYI
Model Number: JYQD-V8.3E
MOQ: 1 set
Place of Origin: China
Price: Negotiable
Packaging Details: PE bag+ carton
Delivery Time: 5-10 days
Payment Terms: T/T,L/C,Paypal
Supply Ability: 1000sets/day
Working voltage: 24V DC
Working current: 10A
Application: Centrifugal blower
Suitable motor: sensorless BLDC motor
O.V / L.V protection: Yes
Add heatsink: >100 watt
  • Product Details
  • Company Profile

Sensorless 24V BLDC Motor Driver , Bldc Driver Board For Centrifugal Blower

24V DC sensorless BLDC motor speed driver board for Centrifugal blower controller JYQD-V8.3E
Model number: JYQD-V8.3E
Operating temp. :-20—85℃
Operating voltage :24V
Max current :10A
·PWM speed control PWM frequency:1-20KHZ; Duty cycle 0-100%
O.V / L.V protection: YES
Add heatsink :>100 watt
5VBLDC motor Driver board internal output voltage
MMotor speed pulse signal output port, 5V pulse signal.
Z/FRotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VRSpeed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
GNDUsed for Drive board internal control
2. Power port
MAmotor phase A
MBmotor phase B
MCmotor phase C
GNDDC-
VCCDC +
Wiring diagram
3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
4.Control port distance: 2.54mm,Power port distance:3.96 mm
5. Pay attention to the insulation between the BLDC motor driver MOSFET and the heatsink or the installation plate.
Dimensional drawing
Application notes:
1. Confirm that the voltage and power parameters of the motor not exceed the range of the BLDC motor driver board as specified.
2. This BLDC motor driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)
3. JYQD-V8.3E sensorless BLDC motor driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.
4. Please take note that JYQD-V8.3E BLDC motor driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.

6. The “M” terminal on the JYQD-V8.3E BLDC motor driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
DOWNLOAD JYQD-V8.3E USER MANUAL FOR MORE DETAILS
Quality Sensorless 24V BLDC Motor Driver , Bldc Driver Board For Centrifugal Blower for sale
Send your message to this supplier
 
From:
To: Shanghai Juyi Electronic Technology Development Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly