60 type two head paper tube machine
60 type two head paper tube machine Features:
1. Suitable for paper tube diameter Ø15-60mm; paper tube thickness
2-5mm paper tube production.
2. According to different paper tube, tube speed between 0-25 (m /
3 independent drive two machine head covers an area of ?? small,
reducing the space for the production of smaller diameter paper
tube is the best configuration.
4. Paper tube fixed-length mode for light control fixed length,
this mode of operation is simple and easy to operate, suitable for
5. The main motor for the two Shanghai Simi Ke (2.2kw), this
product is a gear motor, replacing the traditional cycloid motor,
with noise, strong power, low failure rate and so on.
6. Cutter motor for Shanghai Oute gear motor, replacing the
traditional cycloid motor. This product has low noise, strong power
and low failure rate.
7. Cutting table synchronization for mechanical and pneumatic type,
according to the diameter and thickness of the paper tube to adjust
the weight of the cutting unit, cutting table by the pneumatic
return to complete.
8. Cutter lift by the pneumatic to complete; knife speed by
adjusting the cylinder shut-off valve to control. This adjustment
is extremely easy.
9. Inverter is Anritsu products, this product is well-known brands,
the practical value is relatively high, low failure rate, repair
rate is small. By frequency control motor to achieve the machine
10. The main electrical components of the implementation of CHINT
products; cylinder components for the Austrian products. These are
well-known domestic brands, with durable, practical and higher
|Paper tube machine model||FUTU-60type two noses paper tube machine|
|Technical parameter||Control system|
|Number of layers||2-7layers||Inverter||Anruiji products|
|Diameter||15-60(mm)||The main implementation of the device (contactors, etc.)||CHINT products|
|Thickness||2-5(mm)||Signal element (proximity switch, etc.)||Shanghai products|
|Speed||1-20(m/min)||Cylinder components||suo pai/tian ao products|
|Fixed length mode||Light control (infrared)||Synchronous control||Pneumatic|
|Winding head||Two handpiece||Fixed-length way||Proximity switch|
|Cutting method||Single round knife cutting|
|Roll core die fixing method||Bolt top tight|
|Gluing method||Double side gluing|
|control mode||Frequency converter|
|Size (mm)||Drop tube rack||automatic|
|Main dimensions: length * width * height||2300mm*1500mm*1600mm||Belt adjustment||Adjust manually|
|Area: length * width||11000m*5000mm||Paper frame swing angle||Adjust manually|
|Hub diameter||200mm||Out of paper automatic alarm||---|
|Hub height||300mm||For glue||Automatic stainless steel heating plastic tank|
|Minimum tread||800mm||Tape for lubrication oil||Automatic lubrication of stainless steel basin|
|Biggest argument||1100mm||Tension adjustment||Mechanical adjustment|
|Total weight||700kg||Paper holder type||Right angle fixed paper holder|
|Drive system||Roll mandrel||1|
|Host power||2.2kw*2 Shanghai Simic||Roll tube belt||1 article|
|Maximum wheel speed||72r/min||Bottom, surface paper device||Stainless steel paper holder, paper cone|
|Hub output torque||4000NM||Under the rack||Stainless steel plate|
|Reducer model||--||Host||Stainless steel countertops|
|Transmission model||--||Paper guide||stainless steel pipe|
|Transmission chain model||--|
|Hub drive||2 wheel drive|
|Cutter motor||0.2KW, Shanghai|
|Note: due to the continuous update of the product technology, all
data to the product sample!|
Fixed right angle paper holder
The paper holder is a fixed right-angle paper holder, which
occupies a small area and replaces the traditional cross-shaped
paper holder. It is economical and easy to operate. Shelf axis for
the solid round bar, can make the paper run more smoothly. Tissue
paper on the axis of the tray with high wear-resistant materials
and the level of the step design, both to prevent paper from moving
around but also make the paper roll smooth operation, paper plane
at both ends of the plane design not only guarantees the stability
of the paper roll operation, but also for Paper roll to increase
mobility, paper guide manually adjustability is convenient and fast
for the paper into the mold in advance of the wrong layer, so as to
ensure the smoothness of the paper, the upper and lower guide wheel
made of stainless steel tube height of 1.3 meters for the paper
variable Direction provides sufficient space, the paper is not easy
Spray automatic heating plastic rack
Glue system for automatic pneumatic diaphragm diaphragm, pressure
can be adjusted by the pressure to change the speed of plastic,
convenient, easy to operate; glue part of the tray design is
stainless steel, and suitable for different grades of paper.
Plastic frame for the plastic with a large flow diaphragm pump, the
paper will not appear broken gum. Gum leakage phenomenon. Scraper
rod straight 16 optical axis, not easy to deformation, glue more
evenly. Hose for high wear-resistant silicone tube, squeegee
evenly, use a long time, manual squeegee scraper can be rotated by
scraping the scraping lever to avoid paper scraps caused by the
accumulation of paper on the plastic scraping rod caused by
excessive glue, which affects Paper tube quality, with water
Plastic tank for the stainless steel products, with corrosion
resistance, greatly enhancing the service life of the plastic tank.
Bottom paper holder
The bottom paper holder is a one-time finished structure for
backing paper lubrication and gumming. The end of paper automatic
lubrication system is convenient, clean, easy to operate, uniform
lubrication. Tension control at the end of paper By adjusting the
pressure of the pneumatic valve to control the pressure plate to
control the tension of the end of the paper so that the end of the
paper tension equilibrium.
Automatic feeding rack
The sliding tray of the feeding rack is made of stainless steel
plate, and the high wear resistance of the stainless steel plate
greatly enhances the service life of the stainless steel plate.
Paper Tube Samples
Q:What can you do if the machine broken?
A:Our machine's warranty period is 12months,if the broken parts
can't repair,we can send the new
parts replace the broken parts freell,but you need pay the express
cost yourself.if after warranty period,we can through
negotiationfor to solve the problems,and we supply the technical
support for the whole life of the equipment.
Q:What about the service after sale?
A: One you have bought our machine, you can call us or email us
telling us the machine problems and any questions about the
machines. We will reply to you with 12hours and help you to slove
Q: How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to
Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai
Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
Q:You are trade company or factory?
A:We are trade company but we also have own factories. Building
trade company is just for exporting various types of packing
Q. How long the machine could be made?
A:Normally speaking, machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a