1600mm 100m/min Single Facer Corrugated Cardboard Production Line
Main corrugated roller ￠280mm, material 48CrMo alloy steel, treated
with chrome. Adopt independent gearbox, cardan joint structure.
Main frequency converter motor.
SMDW-1600 Vacuum suction type single facer
1. Adopt cover suction structure, equipped with high pressure
strong power fan. Indraft equipped with silencer, air supply and
the electric control converged into the same cabinet, need to
further than 1.5m from the host, the operation part is closed by
the whole cover.
2. Cast iron structure of wallboard, thickness is 130mm.
3. The corrugated roller material is 48CrMo alloy steel, tempering,
medium-frequency hardening, surface grinding, main corrugated
roller diameter is ¢ 280mm, surface hardness above HRC58. Key parts
bearings of corrugated roller, pressure roller use ZWZ
4. Pressure roller ¢ 284mm, surface grinding and chromate finish;
Up-down moving controlled by air cylinder, material is medium
carbon steel #45, thermal refining ( with buffer device).
5. Supplying and withdrawing glue both controlled by pneumatic,
glue spreader roller diameter ￠215mm, engraved 25lines after
surface grinding, then hard chrome plating treated, glue scrapping
roller surface grinding and chromate finish.
6. Corrugated roller, pressure roller material is good brand, with
the limiting device. Pressing air cylinder is ¢ 160mm.
7. Pre-heating roller adopt ¢ 320mm seamless steel pipe.
1. Working width: 1600mm Operation direction: left or right as your
2. Design speed: 80m/min Temperature range: 160—200℃
3. Air source: 0.4—0.9Mpa Heating method: steam heating
Diameter of rollers:
1. Corrugated roller dia.: ￠280mm Pressure roller dia.:￠284mm
2. Glue spreader dia.: ￠215mm Pre-heater dia.: ￠320mm
Power motors parameters:
1. Main drive motor: 7.5KW nominal voltage: 380V 50Hz continuous
(S1) working form
2. Suction motor: 7.5KW nominal voltage: 380V 50Hz continuous (S1)
Main purchased parts and material:
|Item||Brand or Origin||Material model|
|Transmission case||Hebei||Steel welded|
|Rotating joint and metal hose||Tengzhou|
|Main drive motor||Hengshui, Hebei||7.5KW adjustable-speed motor|
|Mounted bearings||Five rings in Zhejiang|
|High pressure fan||Shanghai Yingfa|
|Contactor||CNINT or DELIXI|