Mini Span ADSS Fiber Optic Cable G.652D Single Mode ADSS Cable
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned
into a loose tube made of high modulus plastics. The tubes are
filled with a water-resistant filling compound. The tubes (and
fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a
non-metallic central strength member into a compact and circular
cable core. After the cable core is filled with filling compound.
it is covered with thin PE (polyethylene) inner sheath. After
stranded layer of aramid yarns are applied over the inner sheath as
strength member, the cable is completed with PE or AT
(anti-tracking) outer sheath.
. Various sizes and fiber accounts available to suit your specific
. Fully self-supporting - no messenger wire or lashing required.
. Full complement of attachment hardware available.
. Can be installed without shutting off the power.
. Excellent AT performance, The maximum inductive at the operating
point of AT sheath can reach 25KV.
. Light weight and small diameter reducing the load caused by ice
and wind and the load on towers and backprops.
○Large span lengths and the largest span is ≤ 300m.
. Good performance of the tensile strength and temperature.
. The design life span is 30 years.
Cable Mechanical characteristic:
|Fiber Count||2-96 fibers|
Colored Coating Fiber
|Max. No of loose tube / filler No.||4 / 2|
|Gel filled in Loose tube||Yes|
|Strength Member||FRP (Fiber Reinforced Plastic)|
|Inner sheath thickness||0.8 mm|
|Outer sheath||Outer sheath thickness||1.7±0.2mm|
|1||Mode Field Diameter||1310nm||μm||9.2±0.4|
|4||Core-Cladding Concentricity Error||μm||≤0.5|
|7||Cladding-Coating Concentricity Error||μm||≤12.0|
|8||Cable Cutoff Wavelength||nm||λcc≤1260|
G655 fiber also available.