Aramid Yarn And Water Blocking Tape ADSS Fiber Cable With Double
All-dielectric self-supporting (ADSS) cable is a type of optical
fiber cable that is strong enough to support itself between
structures without using conductive metal elements. ADSS is an
alternative to OPGW with lower installation cost. The cables are
designed to be strong enough to allow lengths of up to 700 metres
to be installed between support towers. ADSS cable is designed to
be lightweight and small in diameter to reduce the load on tower
structures due to cable weight, wind, and ice.
. Light weight, less additional load to tower. The maximum span can
. Strong anti-pull performance, more than 90KN.
. Non metallic structure provides good insulation, excellent
. Equal distribution of aramid yarns with good production process,
excellent stress/strain performance.
. Excellent bullet resistant performance.
. Excellent tracking resistant performance.
. Installation wuthout power off and the normal transmission of
cable won't be influenced by power line fault.
. Loose tube with non-metallic strengthen member, High flexible
Aramid yarn, Can work at electric field<=25KV/m in a long
. Long distance telecom, LAN in high voltage area or access to
. For power transmission system, much thunder areas and high
|Max. No of loose tube / filler No.||2/4||4/2||4/2||8/0||12/0||12/0|
|Number of fiber in tube||6||6||12||12||12||24|
|Gel filled in Loose tube||Yes||Yes|
|Central strength member||FRP||FRP +PE|
|Water blocking material||filling gel in cable|
|Outer sheath thickness||1.8-2.0mm|
|Outer sheath material||HDPE|
|Inner sheath material||MDPE|
|Inner sheath thickness||0.8mm|
|Cable weight (kg/km)||134||134.5||134.9||143||168||182|
|Operation temperature range||-40 ℃to + 70 ℃|
|Installation temperature range||-40 ℃to + 70 ℃|
|Transport and storage temperature range||-40 ℃ to + 70℃|
|Suitable for lines|
≤35KV If the cable will be used on the more than 35KV,the Outer
Sheath material must be Anti-tracking (AT)
|Rated tensile strength (KN)||17.5||17.5||17.5||17.5||17.5||17.5|
|Maximum allowable tensile(KN)||6.9||6.9||6.9||6.9||6.9||6.9|
|Crush resistance||Installation :2200 (N/100mm) Operating :1100N/100mm|
|Minimal installation bending radius||20 x OD|
|Minimal operation bending radius||10 x OD|
Approved by various professional optical and communication product
institution, KSD also conduct various in-house testing in its own
Laboratory and Test Center. She also conduct test with special
arrangement with the Chinese Government Ministry of Quality
Supervision & Inspection Center of Optical Communication
Products (QSICO). KSD possess the technology to keep its fiber
attenuation loss within Industry Standards.
Packing and Marking:
Each single length of cable shall be reeled on Fumigated Wooden
Covered by plastic buffer sheet
Sealed by strong wooden battens
At least 1 m of inside end of cable will be reserved for testing.
Drum length: Standard drum length is 3,000m±2%;