HS9480: Designer Series 11" Indoor/Outdoor HousingLarge Image
Designer Series Installation
Feed-Through Mount Installation
Tamper Kit Installation
The HS9480 Designer Series of indoor/outdoor camera housings offers
a smooth, sleek, look that complements any environment. This series
includes a 3.5 inch diameter x 11-inch length to accommodate
camera/lens combinations up to 7.75 inches in length. The series is
both cost competitive and easy to install.
For quick installation or service, simply remove the two captive
screws and slide off the cover to fully expose the camera and lens.
This allows access to all camera and lens controls when the camera
is in its mounted position. Power, video, and lens control cabling
can be routed through liquid tight fittings in the bottom rear of
the housing or can be routed through the mounting base.
Feed-through mounts and J-mounts are available for these housings
to hide the cabling. The base of the housings permits mounting to
pan/tilts, adjustable heads, and various wall mounts.
These sturdily constructed housings are available with a
preinstalled heater. The heater maintains the internal temperature
of the housing in cold temperature conditions.
- Feed-through wiring option
- Aluminum and advanced polymer construction
- Easy installation
- Full camera accessibility
- 3.5 inch diameter x 11-inch length
- Four liquid tight cable fittings
- Accepts camera/lens combinations up to 7.75 inches in length
- Accessories available
HS9480 Designer Series
|HS9480||Designer series housing, 3.5-inch diameter x 11-inch length, four
liquid tight cable fittings, accepts Camera/Lens combinations up to
7.75 inches in length|
|HS9480-2H||Designer series housing, 3.5-inch diameter x 11-inch length, with
heater, 24V 50/50Hz, four liquid tight cable fittings, accepts
Camera/Lens combinations up to 7.75 inches in length|