Elevator Spare Parts Push Button COP LOP Panel Control Button For Lift Parts

Elevator Spare Parts Push Button COP LOP Panel Control Button For Lift Parts

Basic button structure

Panel
Elevator buttons are installed on the panel, which is usually made of plastic or metal. Plastic panels are more common because they are of lower cost and easier to process and install. Metal panels look more upscale and are often used in some high-end office buildings, hotels and other places. The main functions of the panel are to fix the buttons, provide a flat installation surface for the buttons, and also play a certain protective role, preventing dust, moisture and other substances from directly contacting the electronic components inside the buttons.

Button Body
Keycap: This is the outermost part of the button that people directly press with their fingers. Keycaps are usually round or square, with a certain curvature on the surface to conform to ergonomics and make it convenient for users to press. They can be made of materials such as plastic or rubber. Plastic keycaps are relatively hard in texture and have a shiny appearance; rubber keycaps feel soft and elastic, providing a better tactile sensation when pressed. The keycaps are usually marked with floor numbers, letters (used for special functions, such as "B" for basement) or symbols (such as open/close door symbols). These markings are either printed on the surface of the keycap by printing technology or fixed on the keycap by inlaying a sheet with the markings.
Button Housing: Located beneath the keycap, it is used to wrap and protect the internal mechanical or electronic components. It is generally made of hard plastic, with a shape and size that match the keycap. The design of the housing should ensure that the internal components will not be damaged during normal pressing and can provide stable support, enabling the button to maintain good performance during long-term use.

Trigger Mechanism
Mechanical Trigger:
There is a mechanical switch inside this type of elevator button. When the keycap is pressed, the keycap will push a mechanical connecting rod or plunger, causing the mechanical switch to close and thus generating an electrical signal. The mechanical switch is usually a microswitch, which is characterized by being small and sensitive. Inside the microswitch, there is an elastic metal sheet. When subjected to an external force, the metal sheet will deform and come into contact with another contact point, realizing the conduction of the circuit. The advantages of mechanical trigger buttons are simple structure, high reliability, and obvious tactile feedback when pressed, allowing users to know that the button has been pressed.
Capacitive Trigger:
Capacitive elevator buttons do not have a mechanical triggering part. They work by utilizing the capacitance characteristics of the human body. When a finger approaches or touches the keycap, the capacitance value between the human body and the capacitance sensing electrode inside the button will change. After the circuit inside the button detects this capacitance change, it will generate a triggering signal. The advantages of capacitive buttons are that their appearance can be made more beautiful. Since there are no mechanical parts, the keycap can be made very thin, and they have a long service life without being damaged due to mechanical wear. However, their disadvantages are that they are sensitive to environmental factors (such as humidity, static electricity, etc.), and in some cases, mis-triggering may occur.

Circuitry
The circuitry part of the elevator button mainly includes signal transmission lines and control chips. When the triggering mechanism generates a signal, the signal will be transmitted to the control chip through the lines on the printed circuit board (PCB). The control chip processes the signal and converts it into an instruction that the elevator control system can recognize, for example, telling the elevator which floor to go to. The printed circuit board is the carrier of the entire circuit, on which there are various electronic components such as resistors, capacitors, integrated circuits, etc. These components work together to ensure the stable transmission and correct processing of the signal.
Indicator Light
Most elevator buttons are equipped with indicator lights. When the button is pressed, the indicator light will light up, showing the users that their operation has been received. The indicator lights are usually light-emitting diodes (LEDs) because LEDs have the advantages of high brightness, low energy consumption and long service life. The colors of the indicator lights can be various, with common ones being red, green or white. Red is generally used to represent stop, fault and other states; green is used to represent normal operation, running and other states; white is more used for decoration or providing basic visual hints. The position of the indicator light is usually in the center or around the button, and through the transparent or semi-transparent part of the keycap, users can clearly see the state of the indicator light.

Product description

wire conection



We offer a contactless button, push button, COP, LOP , hall lantern , segment ,dot matrix , LCD and TFT displays etc.

Regarding to the elevator buttons for maintenance like kone ,otis , ,Mtsubish , hyundai ,sjec etc ,it often doesn't have the cable .But if you need cable ,please kindly let us know .

FAQ

After you pay the sample charge and approval the layout,mostly,the samples will be ready for delivery in 2-3 days.The samples will be sent to you via express, it is ok to use your own express account or prepay us if you do not have an account.

5. What about the lead time for mass production?

Honestly,it depends on the order quantity and the products you need.Generaly speaking,
we suggest that you start inquiry more one month before the date you would like to get the products.

Should you have any question ,pls do not hesitate to contact me.

  Shanghai Zan Feng (CZANF) Technology Co., Ltd provides the customized service and solutions for elevator electrical system and specializes in elevator components. The product scope ranges from contactless button, push button, COP, LOP , hall lantern , segment ,dot matrix , LCD and TFT displays , hoistway fixture , intercom system , traveling cables to other spare parts of elevator.

   We pursue the sustainable success with customers. When it comes to Elevator components, we are about as materials as they come. That’s because we are in the elevator components many years with very wide supply system. We are more committed to the intelligent development of elevators in the near future and becoming the preferred partner for smart and sustainable city development.