BS476-6 Construction Materials Flame Propagation Index Testing Equipment
![]() |
... results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two electric heater was adjusted to ......
Advanced Instruments Co.,Limited
|
IEC60332-3 Vertical Flame Propagation Wire Testing Equipment
![]() |
IEC60332-3 Test apparatus for Vertical Flame Propagation of Bundles of Wires and Cables Product description: Wire and cable bunching combustion test room is suitable for wire and cable fire protection under different standards. Standards: IEC60332-3-10,21,......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
BS476-6 Building Material Flame Propagation Index Tester
![]() |
..., primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2...
Delta Technology (Chongqing) Co., Ltd.
|
Flammability Testing Equipment , BS 476-6 Fire Propagation Index Test Apparatus
![]() |
...Propagation Index Test Apparatus This Part of BS 476 specifies a method of test, the result being expressed as a fire propagation index, that provides a comparative measure of the contribution to the growth of fire made by an essentially flat material, composite or assembly. It is primarily intended for the assessment of the performance of internal wall and ceiling linings The test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
NFPA Propagation Flammability Testing Equipment 800-1000BTU/Ft3
![]() |
NFPA 701-2004 Methods 2 Textiles and Films Flame Propagation Tester Application: It is used to assess the propagation of flame beyond the area exposed the ignition source. It is applicable to vinyl-coated fabric blackout linings and fabrics including ......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Building Materials Flammability Tester Conveyor Belt Flammability And Flame Propagation Characteristics Test Chamber
![]() |
... characteristics of conveyor belts, suitable for propane burning hazard and flammability test of conveyor belts, lifting belts and other materials in research institutes and factories, propane lamp electric mobile positioning, electronic ignition,...
SKYLINE INSTRUMENTS CO.,LTD
|
Needle Flame Tester , 50 W flames tester , 500W flames tester, Flammability Testing Equipment
![]() |
...Flame Tester , 50 W flames tester , 500W flames tester, Flammability Testing Equipment 1.50 /500 W flames tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test......
KingPo Technology Development Limited
|
ASTM / ISO Standard Melt Flow Index Test Equipment
![]() |
...Index Test Equipment Product Introduction: The non-woven plastic PP (polypropylene) in the mask generally has a flowability of 1000 ~ 2000g / 10min, which is a super-high-flow plastic. It cannot be tested by the melt index meter of the ordinary mass method, and we should use the volume Method of melt index test......
Dongguan Haida Equipment Co.,LTD
|
Vertical / Horizontal Flame Apparatus Lab Testing Equipment 5V / HB/ V-0/1/2 UL94
![]() |
...Flame Test Apparatus Lab Testing Equipment 1. Introduction of Flame test Apparatus Horizontal and vertical flame test apparatus is applied to 50W vertical flame test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment......
Pego Electronics (Yi Chun) Company Limited
|
IEC60695-11-5 Needle Flame Tester Flammability Testing Equipment
![]() |
... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|