IEC60320-1 Appliance Couplers Maximum and Minimum Withdrawal Force Testing Equipment
|
...-1 figure 3 and figure 4 and clause 16, for verification of the maximum and minimum withdrawal force of connector/appliance outlet. The minimum withdrawal force is verified by inserting the test pin gauge to each individual connector/appliance outlet. The...
Pego Electronics (Yi Chun) Company Limited
|
IEC 62196-1 EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment
|
IEC 62196-1 EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment Product Information For EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment: IEC62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–......
Sinuo Testing Equipment Co. , Limited
|
EV Charging Gun Connector Withdrawal Force Test Equipment IEC 62196-1
|
EV Charging Gun Connector Withdrawal Force Test Equipment IEC 62196-1 Equipment Overview The force of inserting the charging gun into the socket: vertically downward the charging gun, place the main weight required by the standard on the charging gun, and......
Sinuo Testing Equipment Co. , Limited
|
1PH, AC220V, 50/60Hz Shearing Force Testing Equipment With 200KG,500KG Optional Capacity
|
...Force Testing Equipment With 200KG,500KG Optional Capacity Uses KJ-1068 is used in the industry of siliceous material,solar energy panel,solar energy material,electric wire and electron.It can be used to test all kinds of physical properties of finished or semi-finished products.Choose different clamps,you can do the test of tensile,resist compression,bending, shear, peel, loop tack and fatigue force......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
0.5KN Dual Station Insertion And Extraction Force Testing Machine For Plug And Pull Force Testing Equipment
|
0.5KN Dual-Station Insertion And Extraction Force Testing Machine For Plug And Pull Force Testing Insertion Extraction Force Test Machine IF5112 *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height......
Infinity Machine International Inc.
|
Programmable Touch Screen Insertion and Extraction Force Test Equipment for Connectors
|
.... Test load: 50Kg. Unit switching: Kgf, Nf, Lbf. Test stroke: 0 ~ 60mm (without clamps). Test speed: 5~30 times/min adjustable. The machine can measure tensile, tearing, peeling, splicing resistance, etc. of various materials; resistance ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Insertion Force And Withdrawal Force Test Machine For Connectors ISO Insertion Extraction Force Testing Equipment
|
...Force Test Machine Product introduction Insertion Force Testing Machine is suitable for connectors insertion and withdrawal force tests, the use of unique device automatically matched to find the heart of a variety of special fixture connector, the plug can be completely accurate force results. All the testing informations are setting by the computer and it can automatically store testing condition,test......
SKYLINE INSTRUMENTS CO.,LTD
|
Vertical Pressure Chair Footrest Static Vertical Force Testing Equipment BIFMA Standard
|
...testing, destructive testing and fatigue testing use of the office chair Ipomoea base (Star Base) repeated pressure loading in setting force test cycle, as the fatigue test. Pressure on the size of the holding pressure time and cycle number of tests can be...
Dongguan Haida Equipment Co.,LTD
|
Tensile Strength Measuring Instrument Pulling Force Testing Equipment
|
...Instrument Pulling Force Testing Equipment Tension Machine Product information This machine also known as a materials testing machine , it is applicable to testing tensile stress, compressive stress, shearing force, peeling force, and elongation of ......
Dongguan Liyi Environmental Technology Co., Ltd.
|
55MPa Force Test Equipment 5kg 6-40mm Anchorage Force Tester
|
...Force Tester For Checking Strengthening Concrete Structure SY-10T/20T/30T Anchorage Force Tester Application: It is suitable for testing the anchorage force of several of anchor shank, rebar and expansion bolts, also the pull force of glass block screen wall. The anchorage test range will be from diameter 6mm to 40mm, and bolt diameter will be from M6 to M27. It is used to do verification for the anchoraging force......
Beijing Samyon Instruments Co., Ltd.
|
Submit your “force testing equipment” inquiry in a minute :